NZ’s Leading Heavy Machinery Attachments

robur-hire-sale
Contact us
0800 762 874
robur-hire-sale
Contact us
0800 762 874
Contact us
0800 762 874
Vibro Ripper Savings Calculator | Robur Hire
NZ's Leading Heavy Machinery Attachments
Vibro Ripper — ROI Tool

Stop Hammering Rock.
Vibro Ripper ROI Calculator. See Your Savings in 2 Minutes. Try It

See exactly what switching from a rock hammer to a Vibro Ripper means for your fuel costs, machine hours and annual operating budget — in under 2 minutes.

Your Current Setup
Slide to set 18 L/hr
6 L/hr40 L/hr
Hours per year 2,000 hrs
2004,000
Vibro Ripper assumptions — conservative baseline
Productivity multiplier: 3× faster than a hammer (up to 5× in ideal limestone)  ·  Fuel reduction: 32% less per hour  ·  Maintenance reduction: 40% lower  ·  Vibro Ripper lifespan used for amortisation: approximately 6,000 operating hours
Is a Vibro Ripper right for your ground? Not every site suits one — and we'll be straight with you about that. Tell us about the material, hardness and structure you're working with, and our team will match the right attachment to your project — ripper, breaker, drill, cutter, or a combination.
1 — What type of project is this?
2 — What material are you working with?
3 — Roughly how hard is it? (UCS / MPa)
4 — What’s the structure like? (select any that apply)
5 — What size excavator?
6 — What are you using now?
7 — When would you like to start?
🔓

Your Savings Estimate Is Ready

Enter your details to unlock your full Vibro Ripper savings breakdown — fuel, maintenance, machine hours, payback period and a recommended model — shown on screen right below.

No spam — your details are only used to follow up if your project is active. Nothing else.

Your Vibro Ripper Savings Estimate

Conservative 3× productivity multiplier applied. Actual results may be higher in ideal limestone conditions.

✅

Estimated Annual Saving

$0/ year
Fuel + maintenance savings vs your current setup
Payback Period
—
years
⛏ Your Current Setup
Annual fuel cost—
Annual maintenance—
Attachment (amortised)—
Total annual cost—
⚡ With a Vibro Ripper
Annual fuel cost—
Annual maintenance—
Vibro Ripper (amortised)—
Total annual cost—

Where the savings come from

⛽ Fuel
—
🔧 Maintenance
—
⏱ Machine hours
—
💡
Loading...
🌱 Estimated CO₂ reduction: — tonnes per year (based on diesel fuel savings)

Get Your Full Productivity Report — Free

We'll send you a personalised PDF with a recommended Vibro Ripper model for your excavator and a full breakdown of your savings.

Your details are kept private and used only to prepare your report. Robur will follow up within one business day.

✅

Report On Its Way!

Thanks — we'll have your personalised Vibro Ripper Productivity Report to you within one business day. If your project is active, expect a call from Clem at Robur to discuss your specific application.

All figures are estimates based on the inputs provided and conservative industry averages for Vibro Ripper performance in suitable ground conditions. Actual savings will vary depending on rock type, fracture profile, operator skill, excavator condition and production requirements. The Vibro Ripper is not suited to all ground conditions — Robur recommends a site assessment before purchase. Vibro Ripper price range used for amortisation: $80,000–$110,000 NZD midpoint. Contact Robur for an accurate quote for your specific application. Phone: 0800 762 874.